Square, round and slab automatic slagging system Continuous Casting Machine

Product profile

ZYT square, round and slab automatic slag adding equipment is used to quantitatively add the protective slag into the mold during production to reduce the molten steel and the inner wall of the mold
Friction resistance, reduce oxidation, reduce the randomness of human factors

Characteristics of the equipment

According to different pulling speed, different amount of protective slag is continuously sent into the mold, covering thickness is uniform, and each flow is controlled separately without interference
Continuous slag feeding, slag filter cleaning agglomerate, there is no blocking phenomenon of protection slag
The amount of slag feeding is matched with the speed of drawing to ensure the stability of the thickness of protective slag on the liquid steel surface in the mould.

Equipment composition

Automatic slag feeding system is composed of material box, quantitative feeder, distributor, material tube, material output, control panel, PLC and electric control cabinet.

Technical indicators

The consumption of protective slag is 0.5 ~ 0.7kg/ton steel
Input signal: 1, pull speed signal; 2. Start signal
Signal transmission: analog signal or digital signal
Technical indicators
(1) When the speed is greater than 0.5m/min, the thickness of slag layer is 5-7mm; when the speed is greater than 1.0m/min, the thickness of slag layer is 7-15mm, which can be set according to user requirements
(2) The qualified rate of casting billet can be increased by 0.5 ~ 1.0%
(3) There is a list of data and a list of historical records
(4) Temperature range: -20℃ ~ 70℃
(5) Suitable for dry powder slag, particle slag and other protective slag
(6) Adding slag, blowing slag time, adding slag interval can be adjusted and controlled according to user requirements
(7) System capacity: less than 100W, power supply: 220V/50Hz and DC24V
(8) Can realize gravity or external force automatically slag
(9) Energy medium demand: clean compressed air or nitrogen: 250 ~ 300L/min per flow, pressure 0.4 ~ 0.6mpa

Company profile

Henan Geng Hong Industry Co., Ltd. (hereinafter referred to as "Geng Hong industry") was founded in 2007, specializing in the production, manufacturing and sales of complete sets of iron and steel metallurgical equipment, spare parts of metallurgical equipment and metallurgical accessories. At the same time, it cooperates with domestic metallurgical design institutes and European abax group to undertake the engineering design and contracting construction of complete sets of continuous casting and rolling production lines overseas. Over the years, Geng Hong industry has gradually developed into a comprehensive enterprise integrating design, production, sales and service with the core task of meeting customer needs.

Since its establishment, adhering to the principle of "customer as the core, quality as the foundation and service-oriented", Geng Hong industry has successively established and invested in three factories in Anhui, Luoyang and Nanyang, China. Focusing on the needs of iron and steel enterprises, Geng Hong industry has formed a production and sales system of complete sets of metallurgical equipment, equipment spare parts and metallurgical auxiliary materials, It has also obtained the full overseas sales right of refractory products of cooperative factories, and has set up branches or offices in Hong Kong, Taiwan, Vietnam, Malaysia and Iran. After more than ten years of development, the company has a turnover of more than 30 million US dollars in 2020. Its customers involve major domestic steel mills and more than 20 foreign customers. At the same time, the company provides excellent technical services and support of other trade products for foreign customers.

With the continuous development of the enterprise, we strive to explore a wider international market, pursue to provide customers with more excellent quality, efficient product performance and high-quality service, and become an excellent partner of customers。